Best Garden Room

Garden Room Blinds: What Works on Bifolds and Big Glass

Garden room blinds do more work than blinds in the house. A garden room is mostly glass, often on three sides, so blinds have to cut screen glare in a garden office, give privacy once the lights are on at night, take the edge off summer heat and help hold warmth in winter. They also have to suit doors that fold, slide or swing, frames that may be aluminium rather than uPVC, and walls where you cannot simply drill wherever you like. This page goes through which blind types suit which doors and windows, the fitting problems specific to garden rooms, and the safety rules for corded blinds.

The single most useful thing to know before you shop is what your doors and windows are made of and how they open. That decides which blinds will fit, far more than fabric or colour.

Start with the frame and how the doors open

Walk round the room and note, for each opening:

  • Frame material: uPVC, aluminium or timber. Many garden room companies fit aluminium bifolds and sliders as standard, and uPVC is more common on budget rooms.
  • How it opens: bifold, sliding, French doors, tilt and turn, or fixed glazing.
  • Which way it opens: inwards or outwards. Inward-opening doors rule out anything fixed above the opening that hangs down into the door’s path.
  • Glazing beads: whether the glass is held by beads on the inside, and whether there is a rubber gasket between bead and glass.
  • Space above: how much solid frame or wall there is above each opening to fix a blind to.

If you are still choosing a room, our page on garden room windows and doors covers the glazing options, and it is worth deciding on blinds at the same time.

Blinds for bifold doors

Bifolds are the hardest opening to dress because the panels stack against each other when open. There are three workable approaches.

Frame-mounted blinds that move with each panel

One blind per panel, fixed to the door itself, so the blind folds back with the door. On uPVC doors the best-known version is the Perfect Fit system: Hillarys describes it as made for uPVC windows and doors, with a frame that clips into the rubber seals around the glass, so there is no drilling. Pleated, Venetian and similar styles sit inside the frame. MakeMyBlinds points out that the frame sits slightly proud of the door, so some bifolds may not fold completely flat with them fitted. Ask the supplier to check your door before ordering.

Perfect Fit is not designed for aluminium or timber frames. For those, suppliers offer blinds with hold-down brackets that keep the bottom rail against the glass, or slim frame-mounted pleated blinds made for the job.

A single blind across the whole opening

A roller or Roman blind fixed above the full width of the bifolds, pulled right up when the doors are open. This only works where the doors open outwards, or where the blind can sit high enough above an inward-opening door to clear it. It is the simplest look but blocks the view at the top of the opening when raised.

Integral blinds inside the glass

Blinds built into a sealed double glazed unit, such as Pilkington Insulight with ScreenLine, sit between the panes and are worked by a magnetic slider on the outside of the glass or by a motor. They never gather dust, cannot be damaged by a door being folded back, and leave nothing hanging inside. The trade-off is repair: if the mechanism fails, the usual fix is a new glazed unit. They are also far easier to order at the build stage than to retrofit, so raise them with your installer before the glazing is made.

Sliding doors, French doors and windows

Sliding doors suit vertical blinds or panel blinds that stack to one side, fixed above the opening, because the sliding panel passes behind anything fixed to its frame. Perfect Fit style blinds are generally not suited to sliding doors for the same reason.

French doors and casement windows take frame-mounted blinds well, including Perfect Fit on uPVC. Tilt and turn windows need a blind that moves with the sash or is held down at the bottom, or the blind will swing loose when the window tilts.

Rooflights and lanterns are a separate case. A skylight blind needs side channels or tension wires to hold it against sloping glass, and many people fit them with a pole operator or motor. In a garden room with a large rooflight, this is often the blind that makes the biggest difference to summer heat.

Which blind type for which job

  • Garden office glare: Venetian blinds let you angle the slats to keep sun off the screen while still seeing out. Light-filtering roller blinds are the simpler alternative.
  • Sleeping or a guest room: blackout roller or blackout pleated blinds. Light will still creep round the edges unless the blind sits in a frame or channel. If the room doubles as a bedroom, see garden room bedroom ideas.
  • Holding heat in: cellular or honeycomb pleated blinds trap a layer of air and are sold as the thermal option. They help most at night in winter.
  • Summer heat: a pale or reflective backing reflects more sunlight before it warms the room. On big south or west facing glass, consider solar control glass or external shading as well, because a blind inside the glass stops light but much of the heat is already in the room.
  • Privacy without losing light: sheer or voile style roller blinds, or top-down bottom-up pleated blinds that cover the lower half only.

Materials matter more in a garden room than in the house if it is heated only part of the time. Damp air and cold glass mean condensation, and that can mark fabrics and swell real timber slats. Aluminium or faux wood Venetians and moisture-resistant fabrics are the safer choice in a room that is not heated all winter.

Condensation behind closed blinds

Close the blinds on a cold night and you trap a layer of air against the glass. That air cools, and any moisture in it condenses on the glass and frames. By morning you can find water running down behind the blind and pooling on the sill. To limit it:

  • open the blinds during the day so the glass warms up and dries;
  • keep trickle vents or a window on night vent open if the room is in use;
  • avoid drying washing or running unvented heaters in the room;
  • keep a little background heat on in very cold spells if the room has electronics or fabrics in it.

If condensation is heavy every morning, the blinds are showing a ventilation or insulation problem rather than causing one. Our page on garden room condensation and damp covers the fixes, and how to heat a garden room covers the heating side.

Fixing blinds to a garden room

Garden room walls are not like house walls. Many are timber framed with cladding outside and plasterboard or panelling inside; others are structural insulated panels (SIPs). Two practical points follow.

  • Find solid fixings: a blind bracket screwed only into thin plasterboard will pull out. Fix into the door or window frame head, the timber studs, or a batten fitted for the purpose. Ask your installer where the timber is, ideally before the inside is boarded.
  • Do not drill the frames carelessly: drilling an aluminium or uPVC frame can affect the door’s guarantee. No-drill systems exist for exactly this reason. Check your installer’s warranty terms first.

Motorised blinds are worth considering on high windows and rooflights. Battery and rechargeable motors need no wiring. Mains-powered motors mean new electrical work, which should be done by a registered electrician as part of the room’s circuit; see our page on garden room electrics.

Child safety and blind cords

Looped cords and chains can strangle young children. The Office for Product Safety and Standards guidance on child safety and blind cords says new blinds with looped cords must have child safety devices fitted at manufacture or supplied with the blind. Cord tidies and tensioners should be fixed firmly so the cord or chain is held tight, and cleats should sit at least 1.5 metres from the floor. Keep beds, sofas and anything a child could climb away from the blinds.

In a garden room used as a playroom or family space, cordless blinds, wand-operated blinds, integral blinds or motorised blinds remove the risk altogether.

Frequently asked questions

Can you fit blinds to aluminium bifold doors?

Yes, but not Perfect Fit, which is made for uPVC. Options for aluminium include slim frame-mounted pleated blinds, blinds with hold-down brackets, a single blind fixed above the opening, or integral blinds inside the glass if ordered when the doors are made.

Do blinds stop a garden room overheating?

They help, especially pale or reflective blinds and rooflight blinds, but much of the sun’s heat has already passed through the glass by the time it reaches an internal blind. On large south or west facing glazing, solar control glass or external shading does more.

Do thermal blinds keep a garden room warmer?

Cellular or honeycomb pleated blinds hold a layer of air against the glass and are sold to reduce heat loss through windows, mainly at night. They do not replace proper insulation or heating.

Why is there water behind my garden room blinds in the morning?

Closed blinds trap cold air against the glass, so moisture in the room condenses there overnight. Open the blinds by day, keep trickle vents open and reduce moisture sources in the room.

Will drilling my doors affect the warranty?

It can. Check the door or window maker’s guarantee terms, or use a no-drill system or fix the blinds to the wall or frame head above the opening instead.

For more on planning, building and furnishing a garden room, start at Best Garden Room.

Related guides

Leave a Comment

Your email address will not be published. Required fields are marked *